First, Toilet installing notices 
1. Our products forbid to install with cement, otherwise the coagulation of the cement may expand and crowd to broken the porcelain body.
2. Propose to install with glass cement. (If install with mixed sand slurry, propose to use the grade cement of 325#, the proportion of cement, calcareousness and sand is 1:1.7:11.5)
3. The outfall of the toilet cannot be changed by oneself.
4. The toilet must be ensured on level, the bottom can't install trap, that it will influence the flushing function.
5. Forbid to throw away the newsprint, paper pilch, woman sanitary towel etc. articles which easy to stop up the toilet to it.
6. If install with glass cement, can try flushing by water after the glass cement was solidified.
7.If install with mixed sand slurry, need to try flushing by water for three times after installed, that prevents the solidified cement outfall to influence the flushing function.

Second, Toilet installing instructions
1. Need to check up the outfall and clean the ground before installing.
2. Put the seals on the outfall of the toilet.
3. Set up the position of the toilet, put down the toilet (outfall) aim at the water gap piping, adjust the right site, then make mark line around the toilet (with chalk or white pan) and set the installation hole.
4. To drill the installation hole, aim at the tail screw and the mark line, drill the hole by borer (diameter 10mm, depth 60mm), cased the expanded nail. (No need tail screw popularly)
5. Put on glass cement in mark line.
6. Aim at the installation hole and the glass cement then set up the toilet, push down to the level slowly.
 
 
7. Put the glass cement on the joint of toilet and ground, finish around and keep handsome.
8. Installing the tail screw.
9. Link infall piping, check up to install the strainer.
10. Clean the floor and tools, forbid using immediately (the glass cement need 24 hours to solidify generally), keep the toilet without water in 24 hours.